Fire Breather

2

Considered one of the most well rounded and affordable sports cars ever built there are many who regard the Honda s2000 as near perfect straight from the factory. More often know as purists these individuals look down on any sort of modification done to the AP1 chassis as tarnishing a master piece.

To a purist removing the factory power plant in favor of an LS1 would be considered a cardinal sin but thankfully for us Gerrot is not a purist by any definition of the word.

turbo_ls_1_s2000_1

When asked why he went with an LS1 motor in his s2000 his reply was actually quite simple; It is bad ass, makes loud noises and shoots fire. Sound, nearly inarguable logic.

As an automotive teacher by trade it’s Gerrot’s job to educate and inspire and what better way to light a fire in the heart of the future generation of enthusiasts than with a modern day hot rod?

turbo_ls_1_s2000_8

turbo_ls_1_s2000_7

turbo_ls_1_s2000_3

Like rodders of the past more than enough wasn’t quite enough for Gerrot so in the short eight months it took to get this car on the road he also saw fit to hang a turbo off the side of the motor just to make things a little more interesting.

Suited and booted this s2000 now makes 652whp and a 700 foot pounds of torque, a tremendous jump in performance when compared to the factory F20C numbers.

turbo_ls_1_s2000_9

turbo_ls_1_s2000_6

turbo_ls_1_s2000_5

Not one to brag or boast –he is a teacher after all– Gerrot kept the Silverstone Metallic exterior fairly simple. QA1 springs at all four corners bring the ride height down and spring rates up (450lbs front 325lbs rear), while 17×8/9 SSR Hasemi wheels wrapped in Nitto drag radials serve as rolling stock.

turbo_ls_1_s2000__2

turbo_ls_1_s2000_4

To the casual passer by, or stop light show off, this car looks like ‘just another’ boosted s2000 but should Gerrot want to give an on the spot tutorial that same person would quickly learn the age old lesson that you shouldn’t judge a book by it’s cover.

turbo_ls_1_s2000_10

Powertrain

  • LS1 engine(80K) from 98 WS6(STOCK)
  • 2.5 Bar DPE MAP Sensor/Speed Density Tuned
  • Dual Aeromotive 340lph Stealth Fuel pumps
  • 80lbs SD injectors
  • Aeromotive FPR
  • On3 76mm Journal Bearing turbo
  • 32x12x4 Intercooler with 3in IC piping
  • Wyntom 38mm Wastegate
  • Wyntom 38mm BOV
  • 3.5in Downpipe/Open exhaust by fender(Passenger side)
  • Built T56 Transmission
  • Spec picked clutch
  • Tuned with ECtune

Suspension

  • 325lbs rear springs
  • 450lbs front springs

Wheels/Tires

  • 17×10 +35 25.5 Nitto Drag Radials
  • 17×9+32 24 Nitto 555
  • KYB adjustable shocks on QA1 springs and risers
  • ARP extended wheel studs

Photo Credit: Corey Jacobson Instagram: @photosbywolf, Twitter: @Corey_Jacobson

2 COMMENTS

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.