Ass So Fat You Can See It From The Front: Ms. Fat Booty

Photos By: Chris Johnston

1

Mini Moto Lab‘s latest build, Ms. Fat Booty, started out as a small side project for co-owner Anthony’s girlfriend to cruise around on and was nearly completed four years ago before life got in the way and the build was torn apart and shoved in a box.

Brought back out years later as a much needed distraction from the now ex-girlfriend this once shelved build is now one of the most unique looking ‘Rucks’ on the streets of Toronto.

mini-moto-lab-ms-fat-booty-10-chris-johnston-photo

The focal point of this build, and how it earned its moniker, is of course the Douglas 10×10 rear wheel wrapped in a Duro Top Fighter rear tire.

This combo gives the bike a unique look only possible with a wheel that is as wide as it is tall.

mini-moto-lab-ms-fat-booty-4-chris-johnston-photo

Housing that massive roller is a custom one-off Rucksters rear mount and behind the steam roller is a custom foot actuated rear drum brake.

Up front is a Kitaco 10×3 solid disc wheel wrapped in Pirelli rubber.

mini-moto-lab-ms-fat-booty-6-chris-johnston-photo

A Brembro p32 Front calliper clamps down on a Braking wave 190mm front disc via a Willwood Short Lever and Master combo.

mini-moto-lab-ms-fat-booty-1-chris-johnston-photo

mini-moto-lab-ms-fat-booty-2-chris-johnston-photo

The GY6 motor has been given a little help thanks to a OKO 30mm slide cab, NCY Intake manifold and custom WirusWin exhaust.

The Ruscksters GY6 harness cleans everything up essentially giving the bike a Ruckus version of a wire tuck.

mini-moto-lab-ms-fat-booty-9-chris-johnston-photo

mini-moto-lab-ms-fat-booty-8-chris-johnston-photo

A custom seat, deep blue paint, and a laundry list of black and polished accessories outlined below round out the rest of the build and Anthony says she rides like a tank and is a whole lot of fun.

mini-moto-lab-ms-fat-booty-7-chris-johnston-photo

mini-moto-lab-ms-fat-booty-3-chris-johnston-photo

Mini Moto Lab will be at Fitted Lifestyle this weekend at Ontario Place where you can check out Ms. Fat Booty in person.

If you have a Ruck of your own join their cruse to the show, starting at 9am August 15th at Honda Canada 180 Honda Blvd.

mini-moto-lab-ms-fat-booty-5-chris-johnston-photo

Modification List

Go Parts

  • Custom WirusWin Exhaust
  • NCY Intake Manifold
  • Rucksters GY6 Harness
  • GY6 Motor
  • GY6 Short Axle and Nut
  • OKO 30mm Slide Carb (Black)
  • ComposiMo Angled Clocking Flange
  • Foam Race Filter

Chassis/Custom Framework

  • Rucksters Custom Weld On Mount (10″ wide one-off)
  • Weld On Kickstand
  • PSWRD JDM KickStand
  • PSWRD JDM Seat Frame
  • MML Contour Seat Pan
  • rPro Triple Tree Cover
  • rPro Washer Kit
  • rPro Turn Signals
  • MML Frame Caps
  • CNC Gas Cap Cover
  • MML Front Frame Cover
  • Custom Cut CVT Cover
  • MML Licence Plate Mount
  • Metal Tank Cover
  • rPro Step Tone Pegs

Electrical

  • Full Harness tuck front and rear
  • TrailTech SCMR16 HID Light
  • Arcade Console Buttons
  • Electric Flasher Relay
  • MML Contour LED Seat Pan Taillight

Controls

  • rPro Monster Drag Bars – v2 (Top Mount)
  • Oury Mountain Grips
  • Stage6 Throttle and Controls

Wheels, Brakes & Suspension

  • Douglas 10×10 Rear Rim (rear)
  • Top Fighter Rear Tire
  • rPro Rear Rim Center Cap
  • Kitaco Front 10×3 Solid Dish (front)
  • Front Pirelli – 90/90/10
  • Fox Shox Vanilla RC Shock
  • Eye to Eye Shock Adapter
  • 700lb Fox Spring
  • GY6 Rear Drum Hub
  • Custom Hub Adapter
  • rPro Front Hub
  • KN Low Down Forks – Silver
  • Brembo P32 Front Caliper – Black
  • BOWLS P32 Caliper Adapter – 190mm – Black
  • Braking Wave 190mm Front Disk
  • WilWood Shorty Lever/Brake Master
  • Custom Drum Rear Foot Brake

1 COMMENT

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.