Stance Is Everything - It's all about how it sits

Readers Rides

Reader’s Ride: Dans Jetta GLX

I love when Readers send pictures in to stanceiseverything@gmail.com, I love the fact that people want to be on this site now and that word is getting around. Dan saw his car posted on Part 1 of the Vagkraft 2009 Event coverage post and has been checking out the blog since then and sent some more pictures of his murdered out GLX on Vette Wheels.

K.I.S.S. rule applies, drop, black, wheels

K.I.S.S. rule applies, drop, black, wheels

Probably took some playing around to get the fitment this tight

Probably took some playing around to get the fitment this tight

Dan made the trip out to waterfest 09

Dan made the trip out to waterfest 09

Further proof that driving slammed is entirely possible in Ontario

Further proof that driving slammed is entirely possible in Ontario

With a stance like that I would be smiling too

With a stance like that I would be smiling too

Battle scars, no big deal

Battle scars, no big deal

Thanks Dan for sending in pictures or your ride and if you want to see your ride here just drop me a line at: stanceiseverything@gmail.com

TAGS: , , , , , , ,
Get a Free Two Issue Subscription to PASMAG

5 Comments

  1. Stanley says:

    This is sick! anti-bag ftw!

  2. zach says:

    Sizes on adapters? I have the same wheels and am still deciding on what I want. Are you running the 9.5″ in the rear?

  3. Dan says:

    I’m running 20mm all around. 8.5″ wide in the front and 9.5″ wide out back.

  4. zach says:

    Thanks man, looks great. How much poke do you have out the rear?

  5. Dan says:

    Thanks,Im not sure exactly how much they poke out since i have rolled the arches flat and hammered them out to get the rear sitting low enough. Id say they poke out about an inch and a half from the stock body, the 215/40/16 tires stretched over the 9.5′s really make the difference when it comes to having the right ride height and destroying your tires.

    I will be going with a 205/40 next time for more clearance.

Leave a Comment